Vibrating Feeder

Shanghai Duoling Watson Machinery Co., Ltd is one of leading stone crushing machinery manufacturers in China. ZZG Series Grizzly vibrating feeder are low profile synchronized inertia vibrating feeders newly developed by our company with imported British technique and mainly used for evenly feeding run-of-quarry rock prior to a primary crusher. In general hopper is set above the feeder for storing materials and distributor is set under it to receiver undersize from grizzlies and change discharge passage.

The grizzly rack of the vibrating feeder usually is of double steps adaptable itself for the impact of loading shocks. The spacing of the grizzly bar can be adjustable. Narrow spacing is used for the condition of a lot of clay and contained in feeding material, thus, the undersizers passing through discharge chute will be conveyed by side conveyed by side conveyor as wastes enabling clean materials to be obtained by primary crusher. When few clay and mud being contained in feeding material, broader spacing can be adjusted to so the undersizers passing through distributor and by passing primary crusher can enter directly to the main conveyor underneath to raise the capacity of primary crushing unit.

Specifications of ZZG Vibrating Feeder:

Model	Working Area (MM)	Bar Adjust Range (MM)	MAX. Feed Size (MM)	Capacity (T/H)	Weight (T)
ZZG0725	750×2560	30-130	350	150	2.0
ZZG0937	900×3700	30-120	450	200	3.4
ZZG1037	1050×3700	30-150	500	300	3.6
ZZG1243	1220×4300	35-140	650	400	5.3
ZZG1449	1370×4900	35-165	800	450	6.8
ZZG1560	1500×6000	35-190	1000	600	9.2

Dimensions (MM) -ZZG Vibrating Feeder

Angle	Model	A	B	C	D	E	F	G
0°	ZZG0725	3,035	1,570	890	260	430	155	910
	ZZG0937	4,250	1,724	1,060	280	480	205	1,060
	ZZG1037	4,250	1,874	1,060	280	480	205	1,210
	ZZG1243	4,955	2,206	1,050	240	600	195	1,400
	ZZG1449	5,475	2,372	1,155	280	690	205	1,550
-5°	ZZG0725	2,988	1,570	1,064	260	430	286	910
	ZZG0937	4,161	1,724	1,298	280	480	381	1,060
	ZZG1037	4,161	1,874	1,278	280	480	381	1,210
	ZZG1243	4,811	2,188	1,385	240	600	381	1,400
	ZZG1449	5,393	2,372	1,491	280	690	466	1,550
	ZZG1560	6,610	2,692	1,721	280	690	552	1,680

CZG Series Vibratory Pan Feeder - Crushing & Feeding Equipments CZG series vibratory pan feeder receives material from the stock-bin and the surge-pile and evenly feeding the secondary and tertiary crushers are continuous processes. CZG series vibratory pan feeders are used for a wide variety of applications such as metering and transferring of material at a controlled rate and protecting other equipment from impact loads. These products are widely used in industries, such as mining, metallurgical, coal, construction material, chemical, power and so on.
CZG series vibratory pan feeder is feeding equipment of high economic and it has the following advantages:
1. Light in weight, small in size, simple in construction, reasonable in designation.
2. Assembly, commixing, operation and maintenance are simple.
3. Low noise, low consumption, and high efficiency of conveyance.

Specifications - CZG Series Vibratory Pan Feeder

Model	Working Area (MM)	MAX.Feed Size (MM)	Amplitude (MM)	Capacity (T/H)	Weight (KG)
CZG0815	800×1500	200	4-6	150	499
CZG0916	900×1600	250	4-6	210	620
CZG1118	1100×1800	300	4-6	300	792.4